|
Next: Mixer Unit
Up: Control Board
Previous: Output Assign Module
  Contents
A single transport control module is present in the prototype control
board. Figure 77 shows the silkscreen/assembly layer
for the transport control PCB. Table 4 lists the bill
of materials for this board. Figures 78 and
79 show the top and bottom routing layers, respectively.
Figure 77:
Transport control module PCB, silkscreen/assembly drawing.
|
Table 4:
Transport control module, bill of materials.
REFDES |
QTY |
DESCRIPTION |
S1 - S7 |
7 |
E-Switch momentary PCB-mount pushbutton |
R1 - R3, R11 |
3 |
300 ohm 1/8W |
R4 - R10 |
7 |
2.2K ohm 1/8W |
R1 - R13 |
13 |
0.1uF monolithic |
D1 - D3 |
3 |
dual 7-segment green LED display |
D4 - D6 |
3 |
T1-3/4 green LED |
U1 |
1 |
GAL16V8 |
U2 - U7 |
6 |
74LS373 |
U8 - U13 |
6 |
74LS247 |
|
Figure 78:
Transport control module PCB, component-side routing.
|
Figure 79:
Transport control module PCB, solder-side routing.
|
Next: Mixer Unit
Up: Control Board
Previous: Output Assign Module
  Contents
Steve Richardson
2000-07-06
|
Table of Contents
[Whole document in PDF 1.9MB]
[more photos and information]
|